Dual Audio Cable – 6.5 mm / RCA / XLR, Twin Lead Pair (0.75 m to 12 m)

Twin-lead audio cables for connecting mixers, interfaces, keyboards and outboard gear. Every version is a pair – two connectors at each end, so left and right run as a matched pair rather than two separate cables.

The seven versions

• 6.5 mm to 6.5 mm – mixer to amp, or mixer to interface line inputs
• 6.5 mm to RCA – mixer or interface to hi-fi, DJ controller or consumer gear
• 6.5 mm to XLR female – line output into a powered speaker or mic input
• 6.5 mm to XLR male – into a mixer’s mic/line XLR inputs
• XLR female to RCA – balanced output into an unbalanced input
• XLR female to XLR male – straight balanced run between two balanced devices
• RCA to XLR male – consumer source into a mixer’s XLR inputs

Pick the one that matches the socket on each end – the length is chosen separately, and the price follows the length, not the connector type.

Lengths

0.75 m up to 12 m. Short lengths for patching units sitting next to each other, longer ones for racks and installs. Both tails are the same length, so the pair stays tidy through a cable run.

FAQ

Is this one cable or two?
One cable with two conductors and two connectors at each end – it behaves as a pair but is moulded together, so it does not tangle the way two separate leads do.

Balanced or unbalanced?
The 6.5 mm and RCA versions are typically used unbalanced; the XLR versions carry a balanced signal when both ends support it.

Can I mix connector types in one order?
Yes – each version is a separate option, add the ones you need.

Related

• 6.5 mm jack to jack TRS cable
• 3.5 mm to 4 x 6.5 mm fan-out cable
• DJ stands, cables and accessories