The XDJ-RX3 is an all-in-one, which means the whole rig lives or dies on the condition of one panel – there is no separate mixer or player to replace if the finish goes bad.
This is the glossy laser skin for the XDJ-RX3 – high-gloss laser-cut finish that shifts with the light.
Why cover the panel
Because the screen and jog area are fixed, the flat panel around them is the part that ages. Covering it keeps the deck looking current without touching anything electrical.
What this finish gives you
- Hides scratches and worn print without hiding the controls
- Wipes clean, so booth grime does not build up on the original surface
- Comes off again if you sell the deck or want a different look
This is the option for a deck that appears on camera or under moving stage lights.
Fitting
Pre-cut to the XDJ-RX3 layout: the screen, jogs, pads and fader slots stay clear. Clean the panel, align one edge, and work across with the squeegee. Small bubbles settle within a day or two.
FAQ
Does it interfere with the touchscreen?
No – the screen area is cut out, not covered.
Can I remove it later?
Yes. Warm it gently and peel slowly; any residue cleans off with isopropyl alcohol.
Will it fit in a flight case?
Yes, the added thickness is well under a millimetre.
Do people call these controller stickers or wraps?
Yes – XDJ-RX3 sticker, wrap and skin all describe this product. The difference from a sticker pack is that the panel is cut as one layout-matched piece instead of loose individual stickers.
Reviews
There are no reviews yet.