Pioneer DJ Mixer Cap Set – EQ Knob Caps, Fader Caps and Master Knobs (4 Pack)

$29.00

Replacement EQ knob caps, fader caps and master volume knobs for Pioneer mixers – four to a pack, ten colours. 16 mm EQ caps with 6 mm bore, 19 mm push-on fader caps.

SKU: PIO-CAP-SET Category: Tags: , , , ,

Cap sets for Pioneer mixers and all-in-one units – the replaceable plastic parts, not the pots underneath. If a cap has split, gone missing or worn its indicator line away, this is the fix, and at four to a pack you can do a whole channel strip at once.

Three types – check which one you need

  • EQ knob cap – the small ribbed cap on the high / mid / low controls. 16 mm tall, 6 mm bore, with a coloured indicator line moulded into the top so you can see the position in a dark booth.
  • Fader cap – the push-on cap on the channel and crossfaders. 19 mm wide, slotted so it clips onto the fader stem rather than screwing on.
  • Master volume knob – the larger cap on the master level control, in grey or black to match the factory look.

Mixing them up is the usual mistake: an EQ cap will not sit on a fader stem, and a fader cap is far too wide for an EQ pot.

Specifications

  • Material: hard plastic with a moulded indicator line
  • EQ cap: 16 mm tall, 6 mm inner bore
  • Fader cap: 19 mm, push-on (no thread)
  • Quantity: 4 pieces per pack
  • Colours: black, white, red, blue, green, yellow, purple, pink, dark grey, light grey (availability differs by type)

Why four at a time

Caps fail as a set, not one at a time – the same age, the same cleaning products, the same wear. Buying four costs barely more than one once the parcel is on its way, and it means every control on the strip matches.

Fitting

Pull the old cap straight up off the shaft – do not twist, or you can turn the pot past its stop. Push the new cap on until it seats; the flat inside the bore lines up with the flat on the shaft and it only fits one way.

FAQ

Do I get the potentiometer as well?
No – caps only. If the control feels scratchy or drops out when you touch it, the pot itself needs replacing.

Will these fit my mixer?
They fit the standard 6 mm D-shaft EQ pots and push-on fader stems used across Pioneer mixers and all-in-one units. Check the shaft type on your unit before ordering.

Can I mix colours in one order?
Yes – add each colour as a separate item and we ship them together.

Related

Type

EQ knob cap, Fader cap, Master volume knob

Colour

Black, Blue, Dark Grey, Green, Grey, Light Grey, Pink, Purple, Red, White, Yellow

Reviews

There are no reviews yet.

Be the first to review “Pioneer DJ Mixer Cap Set – EQ Knob Caps, Fader Caps and Master Knobs (4 Pack)”

Your email address will not be published. Required fields are marked *

Scroll to Top